1. Drill 2 holes of 6 mm in the desired place, keep 118mm distance between the holes, the height from the ground 2-4m.
2. Fix two dowels in the hole.
3. Fix a screw on the lowest dowel with a small clearance, insert the groove of the stripe into the slot of the screw and fix it.
4. Stretch the entire Solar LED lamp </ em> and tighten the upper screw in the strict sense.
5. Switch on / off the entire system by the unlocking pin provided.
1. Drill 2 holes of 6 mm in the desired place, keep 118mm distance between the holes, the height from the ground 2-4m.
2. Fix two dowels in the hole.
3. Fix a screw on the lowest dowel with a small clearance, insert the groove of the stripe into the slot of the screw and fix it.
4. Stretch the entire Solar LED lamp </ em> and tighten the upper screw in the strict sense.
5. Switch on / off the entire system by the unlocking pin provided.
| Weight | 0.23 kg |
|---|---|
| Dimensions | 152 × 96 × 83.4 cm |
| IP Grade | IP65 |
| Power | 1.5W |
| CCT | 3000K, 4000K, 6000K |
